
Of course, this all means that the brake pads themselves are under a lot of friction and will wear out relatively quickly. There…
No matter who you are, a good mid-sized SUV can add a lot to your life. With plenty of room for passengers, a great set of feature options, and styling that draws on the high end, the newest Kia Sorento offers a rock-solid vehicle that's hard to pass up.
If you were to look at most of the pitches for the 2018 Kia Stinger, they'd point out its athletic performance and sportiness on the road. One thing that's often not pointed out? The luxurious quality of its interior.
If you live in mountainous, snowy, or icy areas, then you may drive a vehicle with 4-wheel drive capabilities. Your 4-wheel drive car or truck may also have 2-wheel drive capability. If it does, then it may contain a part called a transfer case.
Transfer cases are specialized torque converting devices that attach to regular transmissions. When engaged, these devices can convert 2-wheel drive to 4-wheel drive, and vice versa. Many transfer cases also have the ability to run in high-mode or low-mode.
Low-gear ranges allow the transfer case to enhance the torque coming from the main...
Tire pressure monitoring system (TPMS), a feature included on all newer cars produced after September 2007, measures tire pressure either directly by sensors located in the tires or indirectly through wheel speed and other indicators. Your warning lamp will illuminate when data indicates that tire pressure is low.
The indicator can become illuminated for a number of reasons. On cold mornings in Philadelphia, for example, the lamp may be on for a short time, then turn off. This occurs because tire pressure may have fallen overnight...
Nothing is worse than the sound of a dead battery. The sequence to jump a car is to first clamp the positive cable to the positive terminal of the dead battery, and second, clamp the positive cable to the positive terminal of the live battery. The third step is to clamp the negative cable to the negative terminal of the live battery, and finally, clamp the negative cable to the negative terminal of the dead battery.
Once you start attaching the cables to the batteries, use caution not to let the metal parts of the cable touch any part of…